Configure virtual KVM
Use Virtual KVM with Remote Desktop protocol
Digi CM User Guide
98
Connect to a system through Virtual KVM using Remote Desktop
protocol
When you connect through the Connection window, and a Virtual KVM connection is configured, you
now see:
▪
The terminal monitor button, which connects to the raw ASCII SAC console
▪
A mouse button (next to the monitor icon), which connects to the Virtual KVM graphical interface
▪
The manage button, which connects to the SAC GUI screen
To connect through Virtual KVM using Remote Desktop, follow these steps:
1
Click on the mouse icon.
2
Click OK in each of the three Java confirmation request windows.
The applet first checks whether the optional Virtual KVM Assistant is installed on the system.
Then:
•
If the applet is installed, it starts Virtual KVM Assistant to manage the connection.
•
If the applet is not installed, the attempt to launch the Virtual KVM assistant fails, and the
applet tries to launch the connection directly.
•
If the Virtual KVM Assistant is not installed, a message indicates that the first connection
attempt failed. A second message indicates that the second connection attempt succeeded.
This is normal behavior if the applet does not find the Virtual KVM Assistant. For more
information, see
.
The application starts and you see a message that the connection succeeded:
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
