System administration
Configuration management
Digi CM User Guide
139
2
Under Configuration Export, select the file locations that you wish to save enter a name and click
Export
.
Save the configuration automatically
Further down the screen are the options for automatically saving the configuration either
periodically or 10 minutes after the latest changes. The following list contains the parameter
descriptions.
▪
Automatic backup option
Disable - if you do not want to use an automatic save option
Periodic - used to set the save option per your time frame
10 minutes after last change - as described
▪
Location
CF card, Primary NFS server, User space, Send via email - options for where to save the
configuration
▪
Encrypt
Yes - file will be encrypted (.syscm)
No - file will not be encrypted (.tar.gz) in a tar and a gzip’d format
▪
File Name
The name of the configuration file
▪
Backup interval
The periodic hourly interval to back up the configuration files.
▪
Recipient’s email address
The email address to send the configuration file.
To setup the automatic backup option follow the procedure.
1
Select Periodic or 10 minutes after latest change from the drop down menu.
2
Select the location to save the file.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
