Configure virtual KVM
Use Virtual KVM with Remote Desktop protocol
Digi CM User Guide
97
4
Click Virtual KVM configuration.
This window opens:
5
From the drop-down list next to Virtual KVM configuration, select Enable.
6
Then, from the Client program drop-down list, select Windows remote desktop connection.
7
If you are not using IP automatic detection, enter the IP address.
8
Click the
Save & Apply
button.
Note
If you are using Remote Desktop configuration and you want to use automatic IP address
detection, configure the host mode for the port to MS SAC console before you configure the
Virtual KVM feature for the port. For more information, see
Setup the Digi CM Unit for SAC
.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
