Digi Digi CM 16 User Manual Download Page 2

Page: 2 / 190

Full book title

Revision history—90000301-88

Trademarks and copyright

Digi, Digi International, and the Digi logo are trademarks or registered trademarks in the United States and other

countries worldwide. All other trademarks mentioned in this document are the property of their respective

owners.
© 2018 Digi International. All rights reserved.

Disclaimers

Information in this document is subject to change without notice and does not represent a commitment on the

part of Digi International. Digi provides this document “as is,” without warranty of any kind, expressed or implied,

including, but not limited to, the implied warranties of fitness or merchantability for a particular purpose. Digi

may make improvements and/or changes in this manual or in the product(s) and/or the program(s) described in

this manual at any time.

Warranty

To view product warranties online, visit

www.digi.com/howtobuy/terms

Send comments

Documentation feedback

: To provide feedback on this document, send your comments to

[email protected]

Customer support

Digi Technical Support:

Digi offers multiple technical support plans and service packages to help our customers

get the most out of their Digi product. For information on Technical Support plans and pricing, contact us at +1

952.912.3456 or visit

www.digi.com/support

Revision Date

Description

August 2018

Added certification in French. Added power and ground information for CM

48. Updated the template.

Summary of Contents for Digi CM 16































































































































































































Search results

Summary of Contents for Digi CM 16

Reviews:

Brands by name

Popular brands

Digi Digi CM 16, User Manual

Search results

Summary of Contents for Digi CM 16

Reviews:

Brands by name

Popular brands