Configuration menu
Restore factory defaults
Digi CM User Guide
173
3
Choose Firmware upgrade. Enter y for Yes when asked if you want to upgrade the firmware.
If the firmware upgrade is successful, the Digi CM unit will reboot automatically. If a
Firmware
upgrade failed!
Warning appears, do not reboot the unit but repeat the upgrade process.
Restore factory defaults
You have two choices to restore the unit to its factory defaults. The options are restoring all factory
defaults or restoring all factory defaults except IP settings. To restore your unit to the factory
defaults, do the following:
1
Access the configuration menu.
2
Choose System administration.
3
Select Configuration import.
4
Select Location.
5
Select Factory Default.
The system will restore factory defaults, and the unit will automatically reboot.
Note
Use System Administration to save your configuration in case you need to reload it later or
onto another system. See
for more information.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
