Command line interface
User administration
Digi CM User Guide
152
User administration
Add, edit or delete users with the Digi CM unit’s command line interface.
▪
Add user
Example:
useradd -d /tmp [-g groupid] [-s shellprogram] [username]
groupid
= Options are: Sys admin, Port admin, or Standard User.
500 = Sys admin
501 = Port admin
502 = Standard User
These are the three types of groups supported by the Digi CM unit. You must use one of these.
shellprogram
= Options are: CLI (Command Line Interface), Config menu, Port access menu, or
Custom menu.
/bin/bash = CLI
/bin/editconf = Configuration menu
/bin/vts.master = Port access menu
/bin/menu = Custom menu
These are the four types of shells supported by the Digi CM unit. You must use one of these
four.
•
passwd [
username
]
•
saveconf
•
applyconf
▪
Modify user
Example:
usermod -d /tmp [-g groupid] [-s shellprogram] [username]
Syntax is the same as it is for
useradd
mentioned above.
•
saveconf
•
applyconf
▪
Delete user
Example:
userdel[username]
•
saveconf
•
applyconf
Locator LED script
The Find Me LED on the Digi CM 48 can be deactivated and reactivated with the following file and
command.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
