Configure security and authentication
Configure User Access Control
Digi CM User Guide
74
Restrict a user’s privileges
To restrict user access:
1
Under Port configuration > User access control
2
Enter privileges for <<Everyone>>.
3
Enter restricted user’s name (Here it is Jeff).
4
Enter the privileges this user has. (Notice that <<Everyone>> has more access than Jeff does.)
Note
The usernames and passwords on the Digi CM unit are case-sensitive. Notice <<Everyone>>
has access to Port, Monitor, and Power, while Jeff has access to only Monitor, with no Port or
Power access.
Change the privileges of an access list
1
On the same screen shown in the previous procedure, select an access list from the drop-down
box.
2
Click the
Add access
button, and then click and the
Save & apply
button. When you add the
access list, it will include Paul and Tim.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
