Configuration menu
Dial-in modem access
Digi CM User Guide
170
# cat key.pem >> server.pem
Dial-in modem access
Individual serial ports on the Digi CM unit can be configured for dial-in modem access. To use dial-in
modem mode, an external modem is first attached to a serial port and then the serial port is
configured for dial-in modem access. In the illustration below, port 7 is configured for a dial-in
modem.
To configure a serial port for a dial-in modem, do the following:
1
Access the configuration menu.
2
Choose Serial Port Configuration.
3
Choose an individual port number and then Host Mode Configuration.
4
Select Host mode and then Dial-in modem.
5
Use the ESC key to return to the main menu.
6
Choose Save changes.
Dial-in terminal server access
Individual serial ports on the Digi CM unit can be configured for a dial-in terminal server access. To
use dial-in terminal server access, an external modem is first attached to a serial port on the Digi CM
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
