Install and configure PC cards
Introduction
Digi CM User Guide
28
Introduction
This section includes information on adding and configuring PC cards for the Digi CM unit. PC card
devices that can be added to the the Digi CM unit include a serial modem, compact-flash card,
wireless LAN card, and a network LAN card.
Compatible PC cards
All compact-flash cards work with the Digi CM unit, but not all serial modem, wireless LAN, or regular
LAN cards do. To see a list of compatible cards that have been tested with the Digi CM unit, visit the
Digi support site at
digi.com/products/consoleservers/digicm#productsupport
.
Add a compact-flash card
A PC card slot is located on the front panel of the Digi CM unit. The arrow in the following graphic
indicates the PC card slot.
To install and configure the compact-flash card on the Digi CM unit, do the following.
1
Insert the card into the PC card slot.
2
Access the web interface.
3
Under the
PC card
heading click
Configuration
.
Note
Always select the
Stop card service
button and
Save & apply
before removing the PC card.
4
Click Configure the detected card.
The following fields appear on the configuration page:
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
