Configure security and authentication
Configure authentication methods for port access
Digi CM User Guide
79
Configure authentication methods for port access
You can choose between having a single authentication method, such as RADIUS, or an
authentication method where a Local authentication service is used in addition to the RADIUS,
LDAP, server, or Kerberos. These options are listed when you configure the Digi CM unit for
authentication. To configure the Digi CM unit for authentication, do the following:
1
Access the web interface.
2
Under the
Serial port
heading, choose
Configuration
.
3
Choose All or an Individual port >
Authentication
.
4
From the drop-down menu, choose an authentication method. A configuration screen for the
authentication method you choose is displayed. This figure displays the options for setting up a
RADIUS server as the primary authentication server and Local authentication if the primary
authentication method fails.
Note
Remote authentication to Port access menu can be obtained from Serial port >
Configuration > Port access Menu
5
Fill in the applicable fields.
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
