Custom and default menus
Default menu
Digi CM User Guide
86
Note
To add or configure submenus, select the Submenus hyperlink on the Menu Configuration
page.
Assign users to a menu
Once a menu has been created, users can be assigned to the menu by doing the following:
1
Access the web interface.
2 Configuration > Custom Menu
>
Menu Users
.
A list of available users is displayed.
3
Choose a menu for a user by selecting a menu from the drop down Assigned Menu list.
4
Choose
Save & apply
.
Default menu
Port Access menu
The Port Access menu is a flat (one level) menu showing all ports, port titles and the mode of each
port.
Using the Port Access menu you have a complete overview of all ports and can initiate a connection
to any of them.
When you choose to connect to a specific port, you are prompted again for the username and
password.
There are multiple ways to access the PortAccess menu:
▪
Assigned IP address (see
▪
TCP/IP port 7000
Summary of Contents for Digi CM 16
Page 1: ...User Guide Digi CM 8 port 16 port 32 port and 48 port...
Page 63: ...Digi CM User Guide 63 User administration Administer users 64...
Page 130: ...Power Controller Cascade multiple Digi RPM units Digi CM User Guide 130...
Page 131: ...Digi CM User Guide 131 Port clustering Introduction 132 Configure port clustering 132...
