Digi Connect IT 16 User Manual Download Page 69

Page: 69 / 756

Interfaces

Wide Area Networks (WANs)

Digi Connect IT® 16/48 User Guide

1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.

2. On the menu, click

System

. Under

Configuration

, click

Device Configuration

The

Configuration

window is displayed.

3. Click

Network

Interfaces

4. Select the appropriate WAN or WWAN on which SureLink should be disabled..

5. After selecting the WAN or WWAN, click

IPv4

SureLink

6. Toggle off

Enable

to disable SureLink.

7. Click

Apply

to save the configuration and apply the change.



Command line

1. Log into the Connect IT 16/48 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

admin

to access the Admin CLI.

2. At the command line, type

config

to enter configuration mode:

> config
(config)>

3. Change to the WAN or WWAN's node in the configuration schema. For example, to disable

SureLink for the WWAN interface:

(config)> network interface wwan
(config network interface wwan)>

4. Disable SureLink:

(config network interface wwan> ipv4 surelink enable false
(config network interface wwan)>

Summary of Contents for Connect IT 16





















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Connect IT 16

Reviews:

Related manuals for Connect IT 16

Brands by name

Popular brands

Digi Connect IT 16, User Manual

Search results

Summary of Contents for Connect IT 16

Reviews:

Related manuals for Connect IT 16

Brands by name

Popular brands