Interfaces
Local Area Networks (LANs)
Digi Connect IT® 16/48 User Guide
124
4. For
Add Wi-Fi access point
, type
Example_AP
for the name of the new access point and click
.
The Wi-Fi access point configuration window is displayed.
5. For
SSID
, type
Example_SSID
.
6. Type a
Pre-shared key
that clients will use to access the AP.
7. Click
Apply
to save the configuration and apply the change.
Command line
1. Log into the Connect IT 16/48 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
2. At the command line, type
config
to enter configuration mode:
> config
(config)>
3. Create a new access point:
(config)> add network wifi ap Example_AP
(config network wifi ap Example_AP)>
New access points are enabled by default.
4. Set the SSID for the Wi-Fi access point. Up to 32 characters are allowed.
(config network wifi ap Example_AP)> ssid Example_SSID
(config network wifi ap Example_AP)>
SSID broadcasting is enabled by default for new access points.
