Digi Connect IT 16 User Manual Download Page 674

Page: 674 / 756

Diagnostics

Analyze network traffic

Digi Connect IT® 16/48 User Guide

674

Configure packet capture for the network analyzer

To use the network analyzer, you must create one or more packet capture configuration.

Required configuration items

The interface used by this packet capture configuration.

Additional configuration items

The filter expression for this packet capture configuration.

Schedule the analyzer to run based on a specified event or at a particular time:

The events or time that will trigger the analyzer to run, using this capture configuration.

The amount of time that the analyzer session will run.

The frequency with which captured events will be saved.

To configure a packet capture configuration:



WebUI

1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.

2. On the menu, click

System

. Under

Configuration

, click

Device Configuration

The

Configuration

window is displayed.

3. Click

Network

Analyzer

4. For

Add Capture settings

, type a name for the capture filter and click



The new capture filter configuration is displayed.

Summary of Contents for Connect IT 16





















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Connect IT 16

Reviews:

Related manuals for Connect IT 16

Brands by name

Popular brands

Digi Connect IT 16, User Manual

Search results

Summary of Contents for Connect IT 16

Reviews:

Related manuals for Connect IT 16

Brands by name

Popular brands