Applications
Configure applications to run automatically
Digi Connect IT® 16/48 User Guide
445
l
If
Interval
is selected, in
Interval
, type the interval.
Allowed values are any number of weeks, days, hours, minutes, or seconds, and take
the format
number
{
w|d|h|m|s
}.
For example, to set
Interval
to ten minutes, enter
10m
or
600s
.
l
Click to enable
Run single
to run only a single instance of the script at a time.
If
Run single
is not selected, a new instance of the script will be started at every
interval, regardless of whether the script is still running from a previous interval.
n
Set time
: Runs the script at a specified time of the day.
l
If
Set Time
is selected, specify the time that the script should run in
Run time
,
using the format
HH
:
MM
.
n
During system maintenance
: The script will run during the system maintenance time
window.
7. For
Commands
, enter the commands that will execute the script.
If the script begins with
#!
, then the script will be invoked in the location specified by the path
for the script command. Otherwise, the default shell will be used (equivalent to
#!/bin/sh
).
8. Script logging options:
a. Click to enable
Log script output
to log the script's output to the system log.
b. Click to enable
Log script errors
to log script errors to the system log.
If neither option is selected, only the script's exit code is written to the system log.
9. For
Maximum memory
, enter the maximum amount of memory available to be used by the
script and its subprocesses, using the format
number
{
b
|
bytes
|
KB
|
k
|
MB
|
MB
|
M
|
GB
|
G
|
TB
|
T
}.
10. Click to enable
Once
to configure the script to run only once at the specified time.
If
Once
is enabled, rebooting the device will cause the script to not run again. The only way to
re-run the script is to:
n
Remove the script from the device and add it again.
n
Make a change to the script.
n
Uncheck
Once
.
11.
Sandbox
is enabled by default, which restricts access to the file system and available
commands that can be used by the script. This option protects the script from accidentally
destroying the system it is running on.
12. Click
Apply
to save the configuration and apply the change.
Command line
1. Log into the Connect IT 16/48 command line as a user with full Admin access rights.
Depending on your device configuration, you may be presented with an
Access selection
menu
. Type
admin
to access the Admin CLI.
