Digi Connect IT 16 User Manual Download Page 349

Page: 349 / 756

Services

Configure telnet access

Digi Connect IT® 16/48 User Guide

349

Configure telnet access

By default, the telnet service is disabled.

Note

Telnet is an insecure protocol and should only be used for backward-compatibility reasons, and

only if the network connection is otherwise secured.

Required configuration items

Enable telnet access.

Configure access control for the telnet service.

Additional configuration items

Port to use for communications with the telnet service.

Multicast DNS (mDNS) support.

See

Set the idle timeout for Connect IT 16/48 users

for information about setting the inactivity

timeout for the telnet service.

Enable the telnet service

The telnet service is disabled by default. To enable the service:



WebUI

1. Log into the Connect IT 16/48 WebUI as a user with full Admin access rights.

2. On the menu, click

System

. Under

Configuration

, click

Device Configuration

The

Configuration

window is displayed.

3. Click

Services

telnet

4. Click

Enable

5. Click

Apply

to save the configuration and apply the change.



Command line

1. Log into the Connect IT 16/48 command line as a user with full Admin access rights.

Depending on your device configuration, you may be presented with an

Access selection

menu

. Type

admin

to access the Admin CLI.

Summary of Contents for Connect IT 16





















































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for Connect IT 16

Reviews:

Related manuals for Connect IT 16

Brands by name

Popular brands

Digi Connect IT 16, User Manual

Search results

Summary of Contents for Connect IT 16

Reviews:

Related manuals for Connect IT 16

Brands by name

Popular brands