OPERATOR’S MANUAL
IntelliAg MVT
11001-1643A-201411
VIRTUAL TERMINAL FEATURES
/
19
VIRTUAL TERMINAL FEATURES
The Virtual Terminal (VT) is the main user interface with the IntelliAg Planter
Drill Control system. The terminal is mounted in the tractor cab for easy
accessibility. Terminal features vary between the 4” and 7” display and are
defined below.
POWER ON/OFF
The terminal is powered ON when the ignition key is turned ON and turns
OFF when the ignition key is turned off. A series of startup screens display
while the system is booting. The Top Menu (Setup) screen displays after
power up is complete.
IMPORTANT: The manual is written using the 4” terminal display.
There are some variances in setup instructions between
the terminals in how to navigate to buttons/menus but
menu structures are the same.
4” DISPLAY USER INTERFACE
The terminal consists of the following features used for programming,
material selection, rate change, configuration file import/export, and
navigation:
1. Display screen (High definition 4.3” color display)
2. Rotary knob
3. Hard key buttons (8)
4. Home button
5. Screen toggle button
6. Escape button
7. USB port
Figure 19
Virtual Terminal 4” Display
.
.
Display Screen
2. Rotary
Knob
3. Soft Keys
6.
Escape
4. Home
7. USB Port
on
Terminal
Bracket
5. Screen
Toggle
1.
Nitro Software, Inc.
100 Portable Document Lane
Wonderland
Page 24
