OPERATOR’S MANUAL
IntelliAg MVT
11001-1643A-201411
CONTROL CHANNEL SETUP / 51
CONTROL CHANNEL SETUP
Channel Setup allows configuration of two independent control channels.
Control channel parameters include:
•
Control Mode
•
Drive Type
•
Drive Frequency
•
Input Filter
•
Gear Ratio
•
Sensor Constant
•
# Seed Rows
•
Channel Width
•
Precharge Time
•
Delay Time
•
Flush Time
DEFINE CHANNEL PARAMETERS
To Setup a Control Channel:
1. Press the Top Menu button to display the Setup screen.
2. Press the Controls button.
– To configure more than one control channel, press the Next
Channel button.
– A channel identified as Disabled indicates the channel is not in
use.
3. At the Channel Setup screen, use the rotary button to highlight each
yellow input box.
4. Push in the rotary button to select or change the value.
5. Push in the rotary button again to accept the change.
6. Press the More button for additional parameters.
Nitro Software, Inc.
100 Portable Document Lane
Wonderland
Page 56
