OPERATOR’S MANUAL
IntelliAg MVT
11001-1643A-201411
VALVE CALIBRATION / 73
Method 2 Partial Catch:
1. Use a container such as a bucket or barrel to catch all liquid.
2. Weigh empty container.
3. Weigh container with liquid.
4. Calculate weight of the liquid (weight of full container minus empty
container).
5. Calculate gallons dispensed.
6. Calculate % of total volume caught.
7. Gallons dropped/% caught.
PERFORM A LIQUID FLOW CATCH TEST
Tanks must contain material. Be prepared to catch the material in a
container so it can be weighed at the end of the calibration.
1. At the Controls screen, press the K Factor Calibration button.
2. Enter the Target Ground Speed and Target Flow Rate to calculate the
operation rate.
3. Press the Start button.
4. Turn on physical master switch or press the Master Switch button.
5. Press Stop button when container is full.
When the START key is engaged, the machine will become
operational. All necessary precautions must be taken to ensure
user safety. Failure to practice all necessary caution may result in
serious injury or death.
6. Enter amount (gallons) dispensed in the Total Amount field.
7. Press Save button to accept the selection.
8. The system automatically calculates and saves the new K Factor for
this material.
Nitro Software, Inc.
100 Portable Document Lane
Wonderland
Page 78
