OPERATOR’S MANUAL
IntelliAg MVT
11001-1643A-201411
84 / SYSTEM CONFIGURATION
POPULATION ADJUST
Scales the displayed population value to allow for inaccuracies with seed
sensors in certain applications. This is a multiplier of the monitored
population value. For true calculated results, the value should be set to
100.0%. If the monitored value is reading low, the value can be increased
above 100.0% to achieve the desired population display. The displayed
value is calculated by the monitored value x population scalar.
POPULATION FILTER
Stabilizes the monitored population display. For a true population value, this
number should be set to 0.0%. 0.0 is no filtering at all. 99 is the highest level
of filtering available. Set the filter to meet the appropriate level of filtering for
your specific use.
ROW FAIL RATE
Sets the threshold for row failure alarms. The value is entered in seeds per
second. Both values are adjustable allowing for numerous combinations.
The default value is 2/1 that indicates a row failure threshold of 2 seeds in 1
second.
(Actual Population - Monitor Population) X 100
Monitor Population
Nitro Software, Inc.
100 Portable Document Lane
Wonderland
Page 89
