OPERATOR’S MANUAL
IntelliAg MVT
11001-1643A-201411
PCM SOFTWARE UPGRADE / 131
PCM SOFTWARE UPGRADE
Upgrading the planter control module software requires a USB memory
device formatted to FAT32.
NOTE:
Contact Technical Service for
upgrade assistance if required
at the DICKEY-john U.S. office
at 1-800-632-3307 or the
Europe office at
+33 1 41 19 21 80
([email protected]).
To Load Software:
1. Power on terminal.
2. Insert USB memory device that has the software upgrade.
3. An Update screen displays. Press the Update button. The update
begins with a status bar indicating load progress.
IMPORTANT: Do not press any buttons while loading is in progress!
4. When “Programming Complete!” appears on screen, press the Reboot
button to restart.
5. Remove USB memory device.
Figure 102
Loading Software
Update
Reboot
Exit
Target Note at Address: 128
ManufCode: 15 IndGrp: 2 DevCls: 4 Func:128
IdNum: 10028
Ignore node at address: 250
ManufCode: 15 IndGrp: 0 DevCls: 0 Func: 129
IdNum: 4660
Initializing...
Communications Established, Security Complete...
1752 Program Data Blocks Sent
Verify Chec ksum...
Download Time: 234.1 seconds
Programming Complete!
Status bar
Wait to proceed
until load is complete
Nitro Software, Inc.
100 Portable Document Lane
Wonderland
Page 136
