OPERATOR’S MANUAL
IntelliAg MVT
11001-1643A-201411
VALVE CALIBRATION / 67
GRANULAR CONTROL CALIBRATION
Performing a Limit Output, Valve Calibration, and Spreader Calibration are
required for a granular control channel type.
LIMIT OUTPUT
In certain instances, it is necessary to limit the output of the control channel
before running a valve calibration. System capacities are greater than the
actual desired capacities. These features allow setting the maximum output
of the channel to prevent machine damage.
Figure 55
Limit Output
To Perform a Limit Output:
1. Press the Limit Output button to access the Limit Output screen.
2. Move the implement to the “raised” position.
3. Apply the tractor brakes and lock in the applied position.
4. Put the transmission in “park” or in a locked, neutral position.
5. Engage hydraulic system.
6. Run engine at normal operating RPM until hydraulic fluid is at normal
operating temperature.
7. Place the master switch in the ON position.
8. To change the valve position, press the Increment or Decrement
buttons repeatedly until the desired minimum or maximum output value
is reached.
9. Press the Start button and the valve calibration immediately begins.
The calibration runs using the new max flow value.
Nitro Software, Inc.
100 Portable Document Lane
Wonderland
Page 72
