21
ENGLISH
• To increase the bass or treble: Turn the control
clockwise. (The bass or treble sound can be
increased to up to +12 dB in steps of 2 dB.)
• To decrease the bass or treble: Turn the
control counterclockwise. (The bass or treble
sound can be decreased to up to –12 dB in
steps of 2 dB.)
MASTER VOLUME
PHONES
TONE CONTROL
TUNING
STATUS
SURROUND MODE
DOLBY/DTS
SURROUND
BAND
AV SURROUND RECEIVER AVR-770SD
AUTO
PCM
INPUT MODE
FUNCTION / SELECT
SIGNAL DETECT
SURROUND BACK
OUTPUT
DIRECT
/STEREO
5ch/6ch
STEREO
DVD
AUTO
DIG
DIGITAL
STANDBY
¢
ON / STANDBY
£
OFF
1, 3
2
[1] Adjusting the sound quality (tone)
• The tone control function will not work in the direct mode.
After starting playback
1
The tone switches as follows each time the
TONE CONTROL button is pressed.
2
With the name of the volume to
be adjusted selected, turn the
SELECT knob to adjust the level.
FUNCTION / SELECT
3
If you do not want the bass and treble to be
adjusted, turn on the tone defeat mode.
The signals do not pass
through the bass and treble
adjustment circuits, so it
provides higher quality sound.
TONE CONTROL
BASS
TREBLE
DEFEAT
(Main unit)
MASTER VOLUME
PHONES
TONE CONTROL
TUNING
STATUS
SURROUND MODE
DOLBY/DTS
SURROUND
BAND
AV SURROUND RECEIVER AVR-770SD
AUTO
PCM
INPUT MODE
FUNCTION / SELECT
SIGNAL DETECT
SURROUND BACK
OUTPUT
DIRECT
/STEREO
5ch/6ch
STEREO
DVD
AUTO
DIG
DIGITAL
STANDBY
¢
ON / STANDBY
£
OFF
[2] Listening over headphones
1
Plug the headphones’ plug into
the jack.
Connect the headphones to
the PHONES jack.
The speaker output is
automatically turned off when headphones
are connected.
1
PHONES
NOTE:
To prevent hearing loss, do not raise the volume level
excessively when using headphones.
1
Use this to turn off the audio
output temporarily.
Press the MUTING button.
Cancelling MUTING mode.
• Press the MUTING button
again.
• Muting will also be cancelled when
MASTER VOL is adjusted up or down.
[3] Turning the sound off temporarily (MUTING)
1
The AVR-770SD is equipped with two 2-channel playback modes exclusively for music.
Select the mode to suit your tastes.
Playing audio sources (CDs and DVDs)
1
DIRECT mode
Use this mode to achieve good quality 2-
channel sound while watching images. In this
mode, the audio signals bypass such circuits as
the tone circuit and are transmitted directly,
resulting in good quality sound.
DIRECT
/STEREO
(Main unit)
(Remote control unit)
2
STEREO mode
Use this mode to adjust the tone and achieve
the desired sound while watching images.
DIRECT
/STEREO
(Main unit)
(Remote control unit)
MASTER VOLUME
PHONES
TONE CONTROL
TUNING
STATUS
SURROUND MODE
DOLBY/DTS
SURROUND
BAND
AV SURROUND RECEIVER AVR-770SD
AUTO
PCM
INPUT MODE
FUNCTION / SELECT
SIGNAL DETECT
SURROUND BACK
OUTPUT
DIRECT
/STEREO
5ch/6ch
STEREO
DVD
AUTO
DIG
DIGITAL
STANDBY
¢
ON / STANDBY
£
OFF
1, 2
1
2
(Main unit)
(Remote
control unit)
TONE CONTROL
(Main unit)
Summary of Contents for AVR-770SD
Page 286: ...286 MEMO...
Page 287: ......
