Denon AVR-770SD, Operating Instructions Manual

Page: 23 / 288

23
• After adjusting using the test tones, adjust the channel levels either according to the playback sources or to
suit your tastes, as (described) below.
FL CNTR FR SR SB
SW SL
1
Select the speaker whose
level you want to adjust.
2
The channel switches as shown below each
time the button is pressed.
Adjust the level of the
selected speaker.
(Remote control unit)
NOTE:
• Please make sure the “AUDIO” position of
the slide switch on the remote control unit.
1
2 2
Default setting of channel level is 0 dB.
The level of the selected speaker can be
adjusted within the range of +12 to –12 dB
using the cursor buttons.
SW channel level can be turned off by
decreasing one step from –12 dB.
OFF ´ –12 dB ´ 12 dB
ENGLISH
Dolby Digital mode (only with digital input) and DTS Surround (only with digital input)
MASTER VOLUME
PHONES
TONE CONTROL TUNING STATUS SURROUND MODE DOLBY/DTS
SURROUND BAND
AV SURROUND RECEIVER AVR-770SD
AUTO PCM
INPUT MODE
FUNCTION / SELECT
SIGNAL DETECT
SURROUND BACK
OUTPUT
DIRECT
/STEREO 5ch/6ch
STEREO
DVD
AUTO DIG
DIGITAL
STANDBY
¢ ON / STANDBY
£ OFF
1
2 2
1
6
1
2
5
4, 7
5
6
3
Playback with a digital input
1
Select the input source.
q
Select an input source set to digital
(COAXIAL/OPTICAL) (see page 14).
Example: DVD
w
Set the input mode to “AUTO”, “PCM” or
“DTS”.
FUNCTION / SELECT
(Main unit) (Remote control unit)
(Remote control unit)
2
Select the Dolby/DTS Surround mode.
DOLBY/DTS
SURROUND
(Main unit) (Remote control unit)
3
Play a program source with the , mark.
When performing this operation from the main
unit’s panel, press the SURROUND MODE
button, then turn the SELECT knob and select
Dolby Pro Logic
II
or DTS NEO:6.
SURROUND MODE
FUNCTION / SELECT
(Main unit) (Main unit)
(Remote control unit)
OUTPUT
Light
• Lights when the SURROUND BACK button is on.
(Remote control unit)
• The DTS indicator lights when
playing DTS sources.
Light
SIGNAL DETECT
• The SIGNAL DETECT indicator lights
when playing 6.1-channel surround
sources containing the identification
signal.
• The Dolby Digital indicator lights
when playing Dolby Digital sources.
Operate the SURROUND BACK button to switch
Surround Back CH ON/OFF.
When the SIGNAL DETECT indicator is lit, we
recommend turning the surround back channel
using the SURROUND BACK button on the remote
control unit during playback.
To use DTS 96/24 sources with the optimum
system, we recommend turning the surround back
channel off.
Light
Light