Delta-T HH2 User Manual Download Page 64

Page: 64 / 124

Equitensiometers



Upload Data to PC

From the main

Options

menu select

Remote

and press

Set.

The rest of the work is done from your PC keyboard. If not yet installed, install

HH2Read on your PC, as described on page 60.

Connect the PC to your Moisture Meter as explained on page 61.

Run HH2Read and select its

Retrieve

command as described on page 65.

The end result is that your data is saved to file in a comma separated (.CSV) format

as shown on page 70.

Then What?

Having got your readings safely stored on your PC, what do you do with the results?
The .CSV files can be opened by Microsoft Excel for analysis and graphing.
A Dataset Import Wizard is provided with HH2Read to help you import data files into

Excel in a much more controlled and organised way.

For more on the Dataset Import Wizard see page 68.
Further manipulation of the data into irrigation management graphs or reports is

beyond the scope of this manual.
Some users send their data to a commercial irrigation management firm for

interpretation, or they use a commercial irrigation database management package

such as Probe for Windows (see http://www.rsne.com.au/prwin/pr1.htm).

Contact Delta-T for the latest information on compatible irrigation management and

graphing solutions.

Summary of Contents for HH2





























































































































Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands

Delta-T HH2, User Manual

Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands