Delta-T HH2 User Manual Download Page 63

Page: 63 / 124



Equitensiometers

Moisture Meter User Manual 4.0

Reading the Equitensiometer

Before taking readings

1. Select

Options, Device, EQ2

2. Connect it to the HH2.
See also:   Accessories on page 98
3. Set the Plot, Sample and Device ID’s and Sensor Depth if you wish.
See also: Equitensiometer Options Summary on page 55.

To take Readings

1. Press

Read

on the HH2 keypad.

If successful the meter displays the reading, e.g.

EQ2 Store?

315 mV

Reading ready for saving or deleting

2. Press

Store

to save the readings, or press

Esc

3. Press

Read

for the next reading

Press

Esc

if you do not want to save the reading. It will still show on the display but

has not been saved.

Can't Store Readings?

The Store option becomes unavailable when memory is full (or corrupted). In this

case upload the readings to your PC using HH2Read, then, using

Options, Data,

Erase

(via the keypad), delete the readings in the HH2.

Summary of Contents for HH2





























































































































Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands

Delta-T HH2, User Manual

Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands