Delta-T HH2, User Manual

Page: 23 / 124

16

Navigating Options and Readings Moisture Meter User Manual 4.0
7. You will always be asked if you want to store each reading. This applies even if
you just want the average.
Note : You cannot take a new reading until you have decided whether or not to
store the current one.
8. Your running average will not update if your last reading was outside limits,
e.g. an air reading. (It will work OK if you only display readings in mV ).
Note: Profile Probes : Be aware that if any of the 4 or 6 sensors in your profile
probe are outside limits, such as an air reading, none of the 4 or 6 sensor
readings will be added to the cumulative average.
9. Individual averages are provided for each sensor position in Profile Probes.
They are not an average of all the sensors.
Examples
1.
To read, store and average several readings press:
Read, Store,#,#.... Read, Store,#,#.... Read, Store,#,#....
2. To repeatedly read and average but not store readings, press:
Read, Esc,#,#.... Read, Esc,#,#.... Read, Esc,#,#....
N ote the cumulative averaging works even if you did not store the reading.