Delta-T HH2 User Manual Download Page 84

Page: 84 / 124

Linearisation Tables Format



The values are zero padded to ensure that they are always of the form nnn.nnn e.g.

001.123. See your sensor user manual for information about the mV output signal

and the soil permittivity.
The mV values must always increase from the lowest mV value first in the list, to the

highest last in the list.
The converted values must only increase or decrease but not both.

A decimal point "

" not a comma "

" must be used as the decimal separator in the

numbers used for the Converted Values.

Example Linearisation Table:

ML1

0000,001.000

0068,001.476

0101,001.621

0137,001.792

0201,002.089

0458,003.154

0553,003.556

0658,004.014

0764,004.489

0933,005.416

1000,005.837

1100,008.964

0000,000.000

The HH2 contains factory set linearisation tables.
You can upgrade or change these tables with .LIN files using HH2Read.
If the meter should lose power, then the memory containing readings and these new

tables will be lost and replaced by the factory set tables. In that case you will have to

reload any newer tables.

mV reading, integer

Square root of soil permittivity

Summary of Contents for HH2





























































































































Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands

Delta-T HH2, User Manual

Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands