Delta-T HH2 User Manual Download Page 6

Page: 6 / 124

Addendum to HH2 User Manual Version 4.0 for SM300

Addendum to HH2 User Manual
Version 4.0 for SM300

Please keep this document with your HH2 User Manual.

SM300 Sensor readings

Support for SM300 requires HH2 Firmware version 2.5 and HH2Read

version 2.5 or

later.

Please note:

The HH2 does not read SM300 temperature readings

This is because SM300 temperature sensor has a slow response time and is
unsuitable for instantaneous temperature measurements’

Support for the SM300 is exactly the same the support for the ML2, ML2x and
SM200 - described in the HH2 User Manual.

To select the SM300 for the next reading:

Press

Set

at the start-up or readings screen to display the Options menu.

Scroll down to

Device

using the up ▲and down ▼ keys and press Set.

Scroll down to

SM300

using the up and down keys and press Set.

Press Read to take a reading.

How to upgrade your HH2

Support for SM300 is provided in version 2.5 of the HH2 firmware and version 2.5 of
the PC software HH2Read.

Older versions of the HH2 Moisture Meter can be upgraded to work with the SM300

–

Summary of Contents for HH2





























































































































Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands

Delta-T HH2, User Manual

Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands