Delta-T HH2, User Manual

Page: 54 / 124

WET Sensor

47
WET Options Summary
Menu Actions, Notes, ( factory default values in bold)
Data
Plot Id Sets Plot Label, A ..Z
Sample Sets Sample Number, 1 ..2000
Device Id Sets Device ID,
0
..255
Root Depth Sets Rooting Depth, 0 ..9950mm
Sensor Depth Sets Sensor Depth, 0 ..9999mm
Erase No (cancels the action), Yes (erases all stored readings)
Device
Selects the device for subsequent readings.
Options : SM200, ML1, ML2, EQ1, EQ2, PR2, PR1, PR-
Special; also WET if WET calibration is installed
Soil Type
Selects the soil type for WET sensor readings.
Options: Organic, Mineral, Clay, Sand, Custom 1..5;
also Stonewool v & Stonewool h (WET-ST1 option)
also Coir, Peat-based, Min g/h soil & Pot soil (WET-GS1)
Soil Set-Up Sets the properties of the various WET soil types.
Custom 1..n,
Organic, Mineral,
Custom 1..n
b0 (Custom 1..n only) Sets b0 for Custom 1..n, 1.0 ..2.0
b1 (Custom 1..n only) Sets b1 for Custom 1..n, 7.0 ..8.5
Parameter
Sets Soil Parameter, 1.0.. 4. 1..9.0
Capacity Sets Field Capacity, 0.. 0.38 ..1 m
3
.m
-3
Units Selects the units for displaying and storing WET readings.
Conductivity
Selects the Conductivity units.
Options :
mS.m
-1
, mS.cm
-1
, µS.cm
-1
Water Content
Selects the Wetness units.
Options : m
3
.m
-3
, %vol
Display
Selects the values to be displayed and stored for WET
readings.
Options : WET , WET EC
b
ε
b
, WET mmDef
Compensation
Temperature
Sets the temperature to which conductivity readings are
adjusted. Options : None , 20°C, 25°C
Percent Sets the % temperature compensation, -1.0..
2.0
..4.0%
Date and Time Displays and sets the date and time
Set Date Date screen
Set Time Time screen
Status Displays status information
Resources Resources screen
Versions Versions screen
Remote Connecting to PC screen