Delta-T HH2 User Manual Download Page 3

Page: 3 / 124

Addendum to HH2 User Manual Version 4.0 for ML3

Addendum to HH2 User Manual

Version 4.0 for ML3

Please keep this document with your HH2 User Manual.

ML3 Sensor readings

Support for ML3 requires HH2 Firmware version 2.7 and HH2Read

version 2.7 or

later.

To select the ML3 for the next reading:

Press

Set

at the start-up or readings screen to display the Options menu.

Scroll down to

Device

using the up ▲and down ▼ keys and press Set.

Scroll down to

ML3

using the up and down keys and press Set.

Press Read to take a reading.

Temperature readings are not supported

Please note:

The HH2 does not read ML3 temperature readings

The HH2 hand held meter is intended for taking readings quickly and then moving on

to another location. But the temperature sensor in the ML3 takes about 30 minutes*

to thermally equilibrate with the surrounding soil, and should ideally be buried in the

soil. So for these two reasons it is not appropriate to use the HH2 for soil temperature

readings with this sensor.

* Note: This is defined as the time to equilibrate with and read within 1 degree C of

the soil temperature when burying an ML3 which is itself initially 10 degree C

Summary of Contents for HH2





























































































































Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands

Delta-T HH2, User Manual

Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands