Delta-T HH2 User Manual Download Page 88

Page: 88 / 124

Care and Maintenance



Care and Maintenance

This chapter explains some rules regarding the care and maintenance of the Moisture

Meter to ensure that you can get the best performance from the meter for as long as

possible.

The Case

The Moisture Meter is made of rigid plastic which is solid enough for daily use

carrying around outside. It is designed to withstand everyday knocks and scrapes.
However, the case is not designed for heavy impact such as falling from a great

height or being crushed by large objects.
The HH2 is poorly protected against water ingress. If the meter is partially or wholly

immersed in water or is used in heavy rain, then the unit will fill with water. If water

gets inside the unit, then there may be non-repairable damage with the loss of all

readings recorded.
The case may be cleaned with a damp cloth. Do not use an abrasive material or

chemical cleaner. These may deform the finish of the case.

The Keys and LCD Display

The keys and LCD display are designed to withstand occasional knocks and scrapes.

The keys are designed for routine use over many years and the display should

provide a clear image for the same period.
The LCD has a plastic screen to prevent some damage, but a direct hit from a sharp

or heavy object may penetrate and damage the display.
Do not use an abrasive material or chemical cleaner to clean the display because

they may damage the plastic protection, making the screen difficult to read.

25-way D-Connector

The 25-way D-connector is a male connector into which a female connector is

inserted. The pins in the connector can be damaged if forced together with a

damaged or dirty female D-connector.

Use of the HH2

The HH2 has been designed for use only with specified Delta-T sensors. Delta-T do

not recommend its use with third party sensors and will not be responsible for any

damage caused by the use of the HH2 with non-Delta-T products.

Summary of Contents for HH2





























































































































Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands

Delta-T HH2, User Manual

Search results

Summary of Contents for HH2

Reviews:

Related manuals for HH2

Brands by name

Popular brands