manualshive.com logo in svg

Dell Vostro 200, Owner'S Manual

Introducing the Dell Vostro 200 Setup Manual, a comprehensive guide to help you effortlessly set up and optimize your Dell Vostro 200 desktop. This invaluable manual is available for free download from manualshive.com, providing step-by-step instructions for a seamless user experience.

Share
Download
background image

184

Appendix

Clean your floppy drive using a commercially available cleaning kit. These 
kits contain pretreated floppy disks to remove contaminants that accumulate 
during normal operation.

CDs and DVDs

 

NOTICE: 

Always use compressed air to clean the lens in the optical drive, and 

follow the instructions that come with the compressed air. Never touch the lens in 
the drive.

If you notice problems, such as skipping, with the playback quality of your 
CDs or DVDs, try cleaning the discs.

1

Hold the disc by its outer edge. You can also touch the inside edge of the 
center hole.

 

NOTICE: 

To prevent damaging the surface, do not wipe in a circular motion around 

the disc.

2

With a soft, lint-free cloth, gently wipe the bottom of the disc (the 
unlabeled side) in a straight line from the center to the outer edge of the 
disc.

For stubborn dirt, try using water or a diluted solution of water and mild 
soap. You can also purchase commercial products that clean discs and 
provide some protection from dust, fingerprints, and scratches. Cleaning 
products for CDs are safe to use on DVDs.

Dell Technical Support Policy (U.S. Only)

Technician-assisted technical support requires the cooperation and 
participation of the customer in the troubleshooting process and provides for 
restoration of the operating system, software programs, and hardware drivers 
to the original default configuration as shipped from Dell, as well as the 
verification of appropriate functionality of the computer and all Dell-installed 
hardware. In addition to this technician-assisted technical support, online 
technical support is available at 

support.dell.com

. Additional technical 

support options may be available for purchase.

book.book  Page 184  Thursday, June 14, 2007  6:23 PM

Summary of Contents for Vostro 200























































































































































































































Reviews:

No comments

Related manuals for Vostro 200

Gateway Computer Reference Manual preview
Computer
Brand: Gateway Pages: 126
Gateway DX4200-JB001A Hardware Reference Manual preview
DX4200-JB001A
Brand: Gateway Pages: 124
EBN BPC03-B-2930 Service Manual preview
BPC03-B-2930
Brand: EBN Pages: 9
PRESONUS FIREBOX User Manual preview
FIREBOX
Brand: PRESONUS Pages: 8
Compaq Presario 6500 Manual preview
Presario 6500
Brand: Compaq Pages: 2
Advantech ARK-1220 User Manual preview
ARK-1220
Brand: Advantech Pages: 68
Quanmax QutePC-2000 User Manual preview
QutePC-2000
Brand: Quanmax Pages: 34
Uplift Desk UDA110 Instructions preview
UDA110
Brand: Uplift Desk Pages: 2
Asus Degatto D1T Hardware User Manual preview
Degatto D1T
Brand: Asus Pages: 50
Asus CS5120 User Manual preview
CS5120
Brand: Asus Pages: 26
Asus CM5425 User Manual preview
CM5425
Brand: Asus Pages: 22
Asus CS5110 User Manual preview
CS5110
Brand: Asus Pages: 26
Asus CP5140 User Manual preview
CP5140
Brand: Asus Pages: 16
Asus D620MT Installation Manual preview
D620MT
Brand: Asus Pages: 2
Asus D620MT User Manual preview
D620MT
Brand: Asus Pages: 98
Asus CM1831-US-2AA User Manual preview
CM1831-US-2AA
Brand: Asus Pages: 70
Asus CM6870-US-2AA User Manual preview
CM6870-US-2AA
Brand: Asus Pages: 70
Asus D320SF User Manual preview
D320SF
Brand: Asus Pages: 80

Brands by name

Popular brands

Load more brands