Dell Vostro 200 Owner'S Manual Download Page 134

Page: 134 / 214

134

Removing and Installing Parts

NOTICE:

To connect a network cable, first plug the cable into the network port or

device and then plug it into the computer.

Connect your computer and devices to electrical outlets, and then turn
them on.

See the documentation that came with the drive for instructions on
installing any software required for drive operation.

Check the system setup for drive configuration changes (see "Entering
System Setup" on page 174).

Floppy Drive

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions in the

Product Information Guide

CAUTION:

To guard against electrical shock, always unplug your computer from

the electrical outlet before removing the cover.

NOTE:

If you are adding a floppy drive, see "Installing a Floppy Drive" on page 136.

Removing a Floppy Drive

Follow the procedures in "Before You Begin" on page 101.

Remove the computer cover (see "Removing the Computer Cover" on
page 103).

Remove the bezel (see "Removing the Bezel" on page 123).

book.book Page 134 Thursday, June 14, 2007 6:23 PM

Summary of Contents for Vostro 200























































































































































































































Search results

Summary of Contents for Vostro 200

Reviews:

Related manuals for Vostro 200

Brands by name

Popular brands

Dell Vostro 200, Owner'S Manual

Search results

Summary of Contents for Vostro 200

Reviews:

Related manuals for Vostro 200

Brands by name

Popular brands