Dell Vostro 200 Owner'S Manual Download Page 151

Page: 151 / 214

Removing and Installing Parts

151

Replace the computer cover (see "Replacing the Computer Cover" on
page 166).

NOTICE:

To connect a network cable, first plug the cable into the network device

and then plug it into the computer.

Connect your computer and devices to electrical outlets, and then turn
them on.

Enter system setup (see "System Setup" on page 174) and restore the
settings you recorded in Step 1. Then go to the

Maintenance

section and

clear the low battery and other errors associated with the battery
replacement in the

Event Log

Properly dispose of the old battery.

See the

Product Information Guide

for battery disposal information.

Power Supply

CAUTION:

Before you begin any of the procedures in this section, follow the

safety instructions located in the

Product Information Guide

NOTICE:

To prevent static damage to components inside your computer, discharge

static electricity from your body before you touch any of your computer’s electronic
components. You can do so by touching an unpainted metal surface on the
computer chassis.

battery release lever

battery (positive side)

book.book Page 151 Thursday, June 14, 2007 6:23 PM

Summary of Contents for Vostro 200























































































































































































































Search results

Summary of Contents for Vostro 200

Reviews:

Related manuals for Vostro 200

Brands by name

Popular brands

Dell Vostro 200, Owner'S Manual

Search results

Summary of Contents for Vostro 200

Reviews:

Related manuals for Vostro 200

Brands by name

Popular brands