manualshive.com logo in svg

Dell Vostro 200, Owner'S Manual, Page: 156 / 214

Share
Download
Dell Vostro 200 Owner'S Manual Download Page 156

156

Removing and Installing Parts

Removing the Processor Fan/Heat Sink Assembly

 

NOTICE: 

Do not touch the fan blades when you are removing the processor 

fan/heat sink assembly. This could damage the fan.

1

Follow the procedures in "Before You Begin" on page 101.

2

Remove the computer cover (see "Removing the Computer Cover" on 
page 103).

3

Disconnect the processor fan cable from the system board (see "System 
Board Components" on page 106).

4

Carefully move away any cables that are routed over the processor fan/heat 
sink assembly. 

5

Loosen the four captive screws securing the processor fan/heat sink 
assembly and lift it straight up.

 

CAUTION: 

Despite having a plastic shield, the heat sink fan assembly may be 

very hot during normal operation. Be sure that it has had sufficient time to cool 
before you touch it.

1

captive screws (4)

2

processor fan/heat sink 
assembly

2

1

book.book  Page 156  Thursday, June 14, 2007  6:23 PM

Summary of Contents for Vostro 200























































































































































































































Reviews:

No comments