manualshive.com logo in svg

Dell Vostro 200, Owner'S Manual, Page: 130 / 214

Share
Download
Dell Vostro 200 Owner'S Manual Download Page 130

130

Removing and Installing Parts

7

If removing this drive changes the drive configuration, you will need to 
reflect these changes in system setup. When you restart your computer, 
enter system setup (see "System Setup" on page 174), then go to the 
"Drives" section of the system setup and under 

Drive 0 through 3

, set the 

Drive to the correct configuration.

8

Replace the computer cover (see "Replacing the Computer Cover" on 
page 166).

9

Connect computer and other devices to an electrical outlet.

Installing a Hard Drive

1

Follow the procedures in "Before You Begin" on page 101.

2

Remove the computer cover (see "Removing the Computer Cover" on 
page 103).

3

Check the documentation for the drive to verify that it is configured for 
your computer.

4

Slide the hard drive into the hard drive bay.

5

Align the four screw holes in the hard drive with the screw holes in the 
hard drive bay. 

book.book  Page 130  Thursday, June 14, 2007  6:23 PM

Summary of Contents for Vostro 200























































































































































































































Reviews:

No comments