Dell Vostro 200 Owner'S Manual Download Page 176

Page: 176 / 214

176

Appendix

System Setup Options

NOTE:

Depending on your computer and installed devices, the items listed in this

section may not appear, or may not appear exactly as listed.

System Info

BIOS Info

Shows the BIOS version number and date information.

System Info

Lists system information such as the computer name, and
other system-specific information.

CPU Info

Identifies whether the computer’s processor supports
Hyper-Threading and lists the processor bus speed,
processor ID, clock speed, and L2 cache.

Memory Info

Indicates amount of installed memory, memory speed,
channel mode (dual or single), and type of memory
installed.

Standard CMOS Features

Date/Time

Displays current date and time settings. Date (mm:dd:yy)

SATA Info

Displays the SATA drives integrated in the system (SATA
-0; SATA-1; SATA-2; SATA-3; SATA-4; SATA-5).

SATA HDD Auto-

Detection

Auto detects the SATA connector to which the hard drive
is attached.

Capacity

The combined installed capacity of all the SATA devices.

Drive A

None; 1.44M; 3.5 in. 1.44M (3.5 in by default).

Halt On

All Error; All; But Keyboard. (All, But Keyboard by
default).

Advanced BIOS Features

CPU Feature

• Limit CPUID Value

—

Enabled; Disabled (Disabled by

default)

• Execute Disable Bit

—

Enabled; Disabled (Enabled by

default)

• Virtualization Technology

—

Enabled; Disabled (Enabled

by default)

• Core Multi-Processing

—

Enabled; Disabled (Enabled by

default)

book.book Page 176 Thursday, June 14, 2007 6:23 PM

Summary of Contents for Vostro 200























































































































































































































Search results

Summary of Contents for Vostro 200

Reviews:

Related manuals for Vostro 200

Brands by name

Popular brands

Dell Vostro 200, Owner'S Manual

Search results

Summary of Contents for Vostro 200

Reviews:

Related manuals for Vostro 200

Brands by name

Popular brands