manualshive.com logo in svg

Dell Vostro 200, Owner'S Manual, Page: 178 / 214

Share
Download
Dell Vostro 200 Owner'S Manual Download Page 178

178

Appendix

Boot Sequence

This feature allows you to change the boot sequence for devices.

Option Settings

•

Diskette Drive —

 The computer attempts to boot from the floppy drive. If 

the floppy disk in the drive is not bootable, if no floppy disk is in the drive, 
or if there is no floppy drive installed in the computer, the computer 
generates an error message.

•

Hard Drive

 — The computer attempts to boot from the primary hard 

drive. If no operating system is on the drive, the computer generates an 
error message.

•

CD Drive

 — The computer attempts to boot from the CD drive. If no CD 

is in the drive, or if the CD has no operating system, the computer 
generates an error message.

Onboard LAN Boot 

ROM

Enabled or Disabled (Disabled by default)

SATA Mode

IDE; RAID; AHCI (IDE by default)

Power Management Setup

ACPI Suspend Type

S1(POS); S3(STR) (S3(STR) by default)

Quick Resume

Disabled; Enabled (Disabled by default)

Remote Wake Up

On; Off (On by default)

USB KB Wake-Up 

From S3

Enabled; Disabled (Disabled by default)

Auto Power On

Enabled; Disabled (Disabled by default)

Auto Power On Date

0

Auto Power On Time

0:00:00

AC Recovery

Off; On; Former-Sts (Off by default)

book.book  Page 178  Thursday, June 14, 2007  6:23 PM

Summary of Contents for Vostro 200























































































































































































































Reviews:

No comments