Dell Vostro 200 Owner'S Manual Download Page 131

Page: 131 / 214

Removing and Installing Parts

131

Replace and tighten the four screws to secure the hard drive.

Connect the power and data cables to the drive.

Connect the data cable to the system board.

Check all cables to be certain that they are properly connected and firmly
seated.

Replace the computer cover (see "Replacing the Computer Cover" on
page 166).

NOTICE:

To connect a network cable, first plug the cable into the network port or

device and then plug it into the computer.

hard drive

power cable

serial ATA data cable

system board
connector

screws (4)

screw holes in the hard
drive bay (4)

book.book Page 131 Thursday, June 14, 2007 6:23 PM

Summary of Contents for Vostro 200























































































































































































































Search results

Summary of Contents for Vostro 200

Reviews:

Related manuals for Vostro 200

Brands by name

Popular brands

Dell Vostro 200, Owner'S Manual

Search results

Summary of Contents for Vostro 200

Reviews:

Related manuals for Vostro 200

Brands by name

Popular brands