Dell PowerConnect J-SRX100, Hardware Manual, Page: 92 / 158

NOTE: All network and management access settings are optional.
6.
Click Apply to apply the configuration.
NOTE: After configuring the basic settings, the Web session may timeout.
Refresh or relaunch the page if the applied configuration page is not
displayed .
Configuring Basic System Properties
Table 26 on page 78 through Table 28 on page 79 provide the summary of configuration
details for initial setup.
Table 26: Basic Configuration Summary (Device Identification)
Your Action Function Field
Type the hostname. Defines the hostname of the
services gateway. Host Name
Type the domain name. Defines the network or subnetwork
that the services gateway belongs
to. Domain Name
Type a plaintext password that the
system encrypts.
NOTE: After a root password has been
defined, it is required when you log in to
the J-Web user interface or the CLI.
Sets the password that user root
can use to log in to the services
gateway.
Root Password
(required)
Retype the password. Verifies the root password has been
typed correctly. Verify Root
Password
(required)
Add an IP address by selecting it in the
box to the left of the Add button, then
clicking
Add .
Delete an IP address by clicking it in the
box above the Add button, then clicking
Remove .
Specifies a DNS server that the
services gateway can use to resolve
hostnames into addresses. DNS Name
Servers
Add a domain name by typing it in the
box to the left of the Add button, then
clicking
Add .
Delete a domain name by , clicking it in
the box above the Add button, then
clicking
Remove .
Adds each domain name that
includes the services gateway to
the configuration so that each
domain is included in a DNS search. Domain Search
78
PowerConnect J-SRX100 Services Gateway Hardware Guide