
Table 25: Mapping the Chassis Cluster Ports on a J-SRX100 Services
Gateway
Management Interface
FE Ports on J-SRX100 Services Gateway
fxp0 (management port)
fe-0/0/6
fxp1 (control port)
fe-0/0/7
Junos OS automatically creates the fxp0 and fxp1 interfaces on these ports when the
J-SRX100 Services Gateway is operating in chassis cluster mode.
For more information, see the following guides:
•
Junos OS Interfaces and Routing Configuration Guide
•
Junos OS Security Configuration Guide
Understanding Management Access
Telnet allows you to connect to the services gateway and access the CLI to execute
commands from a remote system. The Telnet CLI connections are not encrypted and
therefore can be intercepted.
NOTE:
Telnet access to the root user is prohibited. You must use more secure
methods, such as SSH, to log in as
root
.
SSH provides the following features:
•
Allows you to connect to the device and access the CLI to execute commands from a
remote system
•
Encrypts traffic so that it cannot be intercepted (unlike Telnet)
•
Can be configured so that connections are authenticated by a digital certificate
•
Uses public–private key technology for both connection and authentication
The SSH client software must be installed on the machine where the client application
runs. If the SSH private key is encrypted (for greater security), the SSH client must be
able to access the passphrase used to decrypt the key.
For information about obtaining SSH software, see
http://www.ssh.com
and
http://www.openssh.com
.
If you are using a JUNOScript server to configure and monitor devices, you can activate
cleartext access on the device to allow unencrypted text to be sent directly over a
Transmission Line Protocol (TCP) connection without using any additional protocol
(such as SSH, SSL, or Telnet). For more information about the JUNOScript application
programming interface (API), see the
Junos OS JUNOScript API Guide
.
73
Chapter 13: Performing Initial Software Configuration on the J-SRX100 Services Gateway
Summary of Contents for PowerConnect J-SRX100
