Dell PowerConnect J-SRX100, Hardware Manual, Page: 52 / 158

NOTE: The rack-mounting kit is not shipped with the device and must be
ordered separately.
Preparing the J-SRX100 Services Gateway for Desk-Mount Installation
You can mount a J-SRX100 Services Gateway on a desk or other level surface horizontally
or vertically. The four rubber feet attached to the chassis provide stability.
Before mounting a J-SRX100 Services Gateway on a desk or other level surface:
• Verify that the site meets the requirements described in “Site Preparation Checklist
for the J-SRX100 Services Gateway” on page 19.
•
Place the desk in its permanent location, allowing adequate clearance for airflow and
maintenance, and secure it to the building structure.
• Remove the services gateway chassis from the shipping carton. For unpacking
instructions, see “Unpacking the J-SRX100 Services Gateway” on page 33.
•
If you are mounting the device vertically on the desk, make sure that the following parts
are available in your vertical desk-mounting kit for the J-SRX100 Services Gateway:
• Vertical stand
• Screws
NOTE: The vertical desk-mounting kit is not shipped with the device and
must be ordered separately.
Related
Documentation
Site Preparation Checklist for the J-SRX100 Services Gateway on page 19
•
•
Unpacking the J-SRX100 Services Gateway on page 33
•
Clearance Requirements for Airflow and Hardware Maintenance of the J-SRX100
Services Gateway on page 24
•
Preparing the J-SRX100 Services Gateway for Rack-Mount Installation on page 37
•
Preparing the J-SRX100 Services Gateway for Wall-Mount Installation on page 38
Preparing the J-SRX100 Services Gateway for Wall-Mount Installation
You can mount a J-SRX100 Services Gateway on a wall. The four rubber feet attached
to the chassis provide stability.
Before mounting a J-SRX100 Services Gateway on a wall:
• Verify that the site meets the requirements described in “Site Preparation Checklist
for the J-SRX100 Services Gateway” on page 19.
38
PowerConnect J-SRX100 Services Gateway Hardware Guide