Dell PowerConnect J-SRX100, Hardware Manual, Page: 42 / 158

Installation Overview for the J-SRX100 Services Gateway
After you have prepared your installation site, you are ready to unpack and install the
services gateway. It is important to proceed through the installation process in the order
shown in Table 15 on page 28.
Table 15: Installation Process Order for the J-SRX100 Services Gateway
For More Information, See Process Steps
“J-SRX100 Services Gateway Safety
Requirements, Warnings, and
Guidelines” on page 41 Review the safety guidelines. 1
“Site Preparation Checklist for the
J-SRX100 Services Gateway” on
page 19 Verify that you have prepared your
site for the installation of the services
gateway using the checklist. 2
“Unpacking the J-SRX100 Services
Gateway” on page 33 Follow the instructions for unpacking
the services gateway and verify that
the parts are received. 3
“Preparing the J-SRX100 Services
Gateway for Rack-Mount Installation”
on page 37
“Preparing the J-SRX100 Services
Gateway for Desk-Mount Installation”
on page 38
“Preparing the J-SRX100 Services
Gateway for Wall-Mount Installation”
on page 38
Prepare the services gateway for
installation. 4
“Installing the J-SRX100 Services
Gateway in a Rack” on page 42
“Installing the J-SRX100 Services
Gateway on a Desk” on page 46
“Installing the J-SRX100 Services
Gateway on a Wall” on page 47
Install the services gateway. 5
“Connecting and Organizing Interface
Cables to the J-SRX100 Services
Gateway” on page 52 Connect cables to external devices. 6
“Grounding the J-SRX100 Services
Gateway” on page 53 Connect the grounding cable. 7
“Powering On and Powering Off the
J-SRX100 Services Gateway” on
page 55 Power on the services gateway. 8
Related
•
Unpacking the J-SRX100 Services Gateway on page 33
28
PowerConnect J-SRX100 Services Gateway Hardware Guide