Dell PowerConnect J-SRX100, Hardware Manual, Page: 65 / 158

CHAPTER 9
Connecting, Grounding, and Powering On
the J-SRX100 Services Gateway
This chapter includes the following sections:
•
Connecting the J-SRX100 Services Gateway to the Power Supply on page 51
• Connecting and Organizing Interface Cables to the J-SRX100 Services
Gateway on page 52
•
Grounding the J-SRX100 Services Gateway on page 53
•
Powering On and Powering Off the J-SRX100 Services Gateway on page 55
Connecting the J-SRX100 Services Gateway to the Power Supply
NOTE: The power supply adapter (30 W) and the 2-prong power cord are
shipped separately for the J-SRX100S and J-SRX100SU models. Contact
your Dell customer service representative for more information.
To connect the device to the power supply:
CAUTION: Before connecting the device to the power supply, attach an ESD
strap to an ESD point and place the other end of the strap around your bare
wrist.
1.
Plug the DC connector end of the power cable into the power connector on the back
of the device (see Figure 15 on page 52).
2.
Plug the AC adapter end of the power cable into an AC power outlet.
51