Dell PowerConnect J-SRX100, Hardware Manual, Page: 109 / 158

You can still press and hold the button for 15 seconds or more to reset the gateway to
the factory defaults.
• To disable the button and prevent the device from resetting to either configuration:
admin@host# set chassis config-button no-clear no-rescue
The
no-rescue
option prevents the Reset Config button from loading the rescue
configuration. The
no-clear
option prevents the Reset Config button from deleting all
configurations on the services gateway.
To return the function of the Reset Config button to its default behavior, remove the
config-button
statement from the device configuration.
Related
Documentation
Using the Reset Config Button on the J-SRX100 Services Gateway on page 93
•
•
Monitoring the J-SRX100 Services Gateway Chassis Using the CLI on page 87
•
Monitoring the J-SRX100 Services Gateway Components Using LEDs on page 89
•
Monitoring the J-SRX100 Services Gateway Using Chassis Alarm Conditions on page 91
•
Monitoring the J-SRX100 Services Gateway Power System on page 92
•
Dell Support on page 95
Dell Support
This topic includes the following section:
•
Dell Support on page 95
Dell Support
If you need assistance while troubleshooting a services gateway, please go to the Dell
Support website at
http://www.support.dell.com .
Related
Documentation
•
Contacting Dell on page 135
95
Chapter 15: Monitoring the J-SRX100 Services Gateway