E-Mail Alert Settings
Select Alerts for List 1
Supplies Alerts
Displays the status, and whether to receive an E-Mail Alert, for consumables.
Paper Handling Alerts
Displays the status, and whether to receive an E-Mail Alert, for paper handling.
Service Call
Displays the status, and whether to receive an E-Mail Alert, for Service Calls.
E-Mail List 2
Displays the acceptable e-mail addresses for the E-Mail Alert feature specified in
E-mail List 2
.
Select Alerts for List 2
Supplies Alerts
Displays the status, and whether to receive an E-Mail Alert, for consumables.
Paper Handling Alerts
Displays the status, and whether to receive an E-Mail Alert, for paper handling.
Service Call
Displays the status, and whether to receive an E-Mail Alert, for Service Calls.
Print Server Settings
The
Print Server Settings
tab includes
Basic Information
,
Port Settings
,
Wireless LAN
,
TCP/IP
,
NetWare
,
SMB
,
AppleTalk
,
E-Mail Alert
,
Bonjour(mDNS)
, and
SNMP
pages.
Basic Information
Purpose:
To configure the printer's basic information.
Values:
System Settings
Printer Name
Specifies the name of the printer using up to 31 alphanumeric characters.
Location
Specifies the location of the printer using up to 63 alphanumeric characters.
Contact Person
Specifies the contact name, number, and other information of the printer's administrator and service center using up to 63 alphanumeric characters.
Administrator E-Mail Address
Specifies the contact address of the printer's administrator and service center using up to 63 alphanumeric characters.
Asset Tag Number
Enter the asset tag number for the printer.
EWS Settings
Auto Refresh
Sets whether or not to automatically refresh the contents of the status display pages.
Auto Refresh Interval
Sets the time interval for refreshing the contents of the status display pages automatically from 15 to 600 seconds.
NOTE:
The
Auto Refresh
feature is effective for the contents of the Top Frame,
Printer Status
page,
Job List
page, and
Completed Jobs
page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Ethernet
*
1
Ethernet Settings
Auto
Detects Ethernet transmission rate and the duplex settings automatically.
10BASE-T
Half-Duplex
Selects 10Base-T Half-Duplex as the default value.
10BASE-T
Full-Duplex
Selects 10Base-T Full-Duplex as the default value.
100BASE-TX Half-Duplex
Selects 100Base-T Half-Duplex as the default value.
100BASE-TX Full-Duplex
Selects 100Base-T Full-Duplex as the default value.
Current Ethernet Settings
Displays the current settings of Ethernet.
MAC Address
Displays the printer's MAC address.
Port Status
LPD
Select the check box to enable LPD.
Port9100
Select the check box to enable Port9100.
IPP
*
2
Select the check box to enable the IPP port.
WSD
Select the check box to enable the WSD port.
SMB
*
2
Select the check box to enable the SMB.
You can also configure the transport protocol to be used. TCP/IP and NetBEUI can be selected simultaneously as the transport protocol.
NetWare
*
2
Select the check box to enable the NetWare port. You can also configure the transport protocol to be used. IPX/SPX and TCP/IP can be selected simultaneously as the transport protocol.
AppleTalk
*
2
Select the check box to enable the AppleTalk port.
Bonjour (mDNS)
*
2
Select the check box to enable the Bonjour(mDNS) feature.
