Back to Contents Page
Installing the Print Cartridges
Installing the Print Cartridges
CAUTION:
Before performing any of the following procedures, read and follow the safety instructions in
your
Product Information Guide
.
NOTICE:
To protect the drums of the print cartridges against bright light, close the front cover within five minutes.
If the front cover remains open for more than five minutes, print quality may deteriorate.
NOTICE:
Ensure that nothing touches or scratches the surface (black-colored film) of the belt unit. Scratches, dirt,
or oil from your hands on the film of the belt unit may affect print quality.
Installing the Print Cartridges
1. Press the side button and open the front cover.
2. Remove the print cartridge inserted at the top cartridge slot by grasping both handles and pulling it out.
3. Shake the print cartridge 5 or 6 times to distribute the toner evenly.
4. Pull out the orange-yellow tape completely from the cartridge. It is approximately 856 mm long.
