DATREND Systems AMPS-1 Operating Manual Download Page 91

Page: 91 / 100

AMPS-1 OPERATING MANUAL

16 Calibration and Maintenance

Calibration of AMPS-1 by a Datrend Authorized Service facility is recommended on an

an n u al

basis, and is

re q u ire d

to extend the product warranty. The basic one (1) year

warranty can be extended to a maximum of five (5) years provided that calibration is
performed by a Datrend Authorized Service Center on an

an n u al

basis.

Refer to the Calibration Decal applied on the back of the unit to determine calibration status
of your AMPS-1.

AMPS-1 contains no user serviceable parts.

O p e n in g th e c as e o f AMPS-1 fo r an y re as o n

w ill v o id th e w arran ty .

For calibration or service assistance, contact Datrend for a Return Materials Authorization
(RMA) number and the location of the nearest Service Facility.

Datrend Systems Inc.

Unit 130 - 4020 Viking Way

Richmond, BC • CANADA • V6V 2L4

Tel: 800.667.6557 (North America Only) or

604.291.7747 • Fax 604.294.2355

e-mail:

[email protected]

www.datrend.com

AMPS-1 should be cleaned with a soft, lint free, damp cloth. Use of cleaning agents may
result in scratching, discoloration, or streaking.

Calibration and Maintenance/Chapter 16

Page 77

Summary of Contents for AMPS-1





































































































Search results

Summary of Contents for AMPS-1

Reviews:

Related manuals for AMPS-1

Brands by name

Popular brands

DATREND Systems AMPS-1, Operating Manual

Search results

Summary of Contents for AMPS-1

Reviews:

Related manuals for AMPS-1

Brands by name

Popular brands