manualshive.com logo in svg

DATREND Systems AMPS-1, Operating Manual

The DATREND Systems AMPS-1 Operating Manual is your go-to resource for understanding and maximizing the features of this exceptional product. Download your free manual at our website and gain valuable insights to get the most out of your AMPS-1 experience.

Share
Download
background image

AMPS-1 OPERATING MANUAL

Table of Contents

1 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
1.2 Simulation Specifications.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

2 General Information.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7

2.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.2 Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2.3 Main Functions of AMPS-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.4 Powering up AMPS-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
2.5 ALPHA and NUMERIC Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
2.6 Power-On Defaults. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

2.6.1 Alpha Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.6.2 Numeric Mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.6.3 AMPSpc. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

2.7 Connecting to AMPS-1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
2.8 Navigating AMPS-1 Menus. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

3 ECG Normal Sinus Rhythm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.2 Normal Sinus Rhythm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.3 Available Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
3.4 ECG Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.5 ECG Advanced Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

4 Arrhythmias. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

4.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.2 Available Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
4.3 Arrhythmia Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
4.4 Defibrillator Training. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

4.4.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.4.2 External Trigger Specifications.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.4.3 Scenario Descriptions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
4.4.4 Defibrillator Discharge Simulation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28

4.5 Arrhythmia Advanced Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

5 Performance Waveforms. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31

5.1 Overview. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.2 Available Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
5.3 ECG Performance Function. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Summary of Contents for AMPS-1





































































































Reviews:

No comments

Related manuals for AMPS-1

Ecco 200 Series Installation & Operating Instructions preview
200 Series
Brand: Ecco Pages: 4
JD Squared 3 Assembly & Operating Instructions preview
3
Brand: JD Squared Pages: 15
DAPAudio D1256 Manual preview
D1256
Brand: DAPAudio Pages: 16
3M 400 Series User Instructions preview
400 Series
Brand: 3M Pages: 28
GE Ettan IPGphor 3 Instrument User Manual preview
Ettan IPGphor 3
Brand: GE Pages: 64
GE AMX 4+ Technical Publications preview
AMX 4+
Brand: GE Pages: 56
GE AMX 4+ Technical Manual preview
AMX 4+
Brand: GE Pages: 132
GE AKTAprocess Site Preparation Manual preview
AKTAprocess
Brand: GE Pages: 16
GE Logiq 500 Advanced Reference Manual preview
Logiq 500
Brand: GE Pages: 474
GE Vivid q N Service Manual preview
Vivid q N
Brand: GE Pages: 698
B&G H5000 Pilot Calibration Manual preview
H5000 Pilot
Brand: B&G Pages: 3
Vari Lite EVENTWASH VL800 User Manual preview
EVENTWASH VL800
Brand: Vari Lite Pages: 23
Vapotherm 2000i Operating Instructions Manual preview
2000i
Brand: Vapotherm Pages: 15
FARM-MAXX FTL Series Operator'S Manual preview
FTL Series
Brand: FARM-MAXX Pages: 35
Guyatone Ultrem GST-C04 Quick Start Manual preview
Ultrem GST-C04
Brand: Guyatone Pages: 2
American DJ Quadra Force/Sys User Instructions preview
Quadra Force/Sys
Brand: American DJ Pages: 1
Sunrise Medical DeVilbiss 119 Instruction Manual preview
DeVilbiss 119
Brand: Sunrise Medical Pages: 9
Tektronix P5205 Instruction Manual preview
P5205
Brand: Tektronix Pages: 54

Brands by name

Popular brands

Load more brands